Gifts

Ribbon Ideas for Gifts: Choose the Bow for the Package

Ribbon ideas for gifts with a measured starting length, three finishing styles and fixes for slipping knots, floppy loops and bulky bows.

The paper is smooth, but the bow is sliding toward the corner every time you lift the box. Ribbon ideas for gifts work better when the finish suits the package. A narrow book, a deep box and a small envelope don't need the same amount of ribbon or the same kind of bow.
Choose the job first: a simple band to hold a tag, a soft bow on top or a fuller decoration that stays in place during a short hand-delivered trip. Then test the ribbon on the actual package before cutting the whole spool into lengths.

Match the Ribbon to the Package

For a small book or a slim box, start with ribbon about half an inch to an inch wide. Wider ribbon can look lovely on a larger box, but it may cover much of a small gift. Lay a loose piece across the wrapped package and look at how much of the paper remains visible.
Soft fabric ribbon makes gentle loops and is useful when you want a bow that lies fairly close to the surface. Paper ribbon gives a flatter finish. Wired ribbon holds a shaped loop, but the cut edges need careful handling and it isn't the choice for a gift a small child will play with.
If the paper has a busy pattern, choose a plain ribbon that repeats one color from it. On plain paper, a patterned ribbon can be the main decoration. One strong detail is often enough.

Measure Before Cutting

Wrap an uncut length around the package in the route you intend to use. Bring the ends together where the knot will sit, then leave enough extra to make the bow and tails. Tie a loose trial bow before cutting if the material allows it.
For a single band around a box, twice the box's width plus twice its depth gives the length needed just to encircle that direction. For example, an 8-inch-wide, 2-inch-deep box needs about 20 inches for the band alone. Add the length your chosen knot, loops and tails require rather than treating 20 inches as the finished cut length.
The trial is especially useful with thick ribbon, which uses more material in a knot. Once you have a successful length, note it for identical packages. Allow a little extra length for small differences in the wrapping.

Try Ribbon Ideas for Gifts With a Flat Band

Cut a length that goes around the package once with a small overlap on the back. Keep the ribbon untwisted, place the overlap where it won't be seen and secure ribbon to ribbon with a method suitable for the material. Test adhesive on a scrap first, particularly with sheer or delicate ribbon.
Slide a gift tag beneath the front band or attach it with a short separate tie. The front stays flat enough for a stack of books or a gift that needs to travel inside another bag. You can move the band slightly off center to leave room for a printed motif on the paper.
For a book, a flat band can also hold a paper bookmark in place. Keep the bookmark outside the wrapping so it doesn't rub against the cover. The recipient can lift it out without undoing a large decoration.

Tie a Soft Bow With Balanced Loops

Tie a simple starting knot where you want the bow to sit, keeping the band snug but not tight enough to crease the box. Make a loop with one end, bring the other end around it and pull a second loop through as you would when tying a shoelace. Pull gently on the two loops to settle the bow.
Adjust one side at a time. Shorten an oversized loop by drawing its tail through a little, then smooth the ribbon so the front surface faces outward. If one tail twists, loosen the knot and correct it instead of pulling harder.
Trim the tails only after the loops are balanced. A diagonal cut is a simple finish; a small inward notch can work on wider ribbon. Use sharp scissors and handle any wire ends carefully, keeping them tucked away from hands.

Make a Fuller Topper Separately

For a bow that doesn't need to hold the package closed, make the decoration separately from the band. Fold the ribbon back and forth into equal loops, pinch the middle and secure the center with a short matching tie. Start with two loops on each side before adding more volume.
Spread the loops gently and attach the finished bow to the package band. This lets you reposition the topper without tightening the whole wrap. Keep its size proportional to the box so the decoration doesn't make the gift awkward to carry.
If you're using wired ribbon, shape the loops with your fingers and cover or tuck the cut ends. Avoid adding loose wire or sharp fastenings where the recipient will grab the bow. A soft ribbon topper is a simpler option when the package will be handled by children.

Fix the Problem Before Adding More Ribbon

If the band slides, check whether it is too loose or whether the package is tapered. A second crossing band may hold better on a straight-sided box, while a tapered container may need a different wrapping method. Don't rely on a bow to secure a heavy or fragile gift.
If the loops collapse, make them smaller or choose a ribbon with more body. If the center is bulky, use fewer loops or a narrower tie around the middle. Adding another layer usually makes a thick knot bulkier.
If the ribbon frays, try a fresh clean cut and follow any finishing guidance supplied for that material. Don't use flame or an improvised chemical treatment on an unknown ribbon. A folded end secured with a suitable method may be enough for the look you want.

Keep a Small Record of the Finish

Save a short sample of ribbon with a note about the package it suited. Keep usable offcuts in a small container, separate from damaged or very short pieces. A length that won't circle a box may still tie a tag.
Before giving the gift, lift it from the bottom and check that the band and tag stay where you placed them. Pack a delicate bow so it won't be crushed on the trip. If it needs to travel a long distance, send the bow flat or choose the simpler band.
Turn the finished package toward you, smooth the two tails and place the tag where the name can be read. The ribbon has done its job when the gift is easy to carry and lovely to open.

When you're choosing the gift as well as the ribbon, browse Mummies & Mistletoe for a design your recipient will enjoy. Let one color from it guide the bow, and check the package's shape before choosing your ribbon width.

Two wrapped gifts showing a flat ribbon band and fuller burgundy bow.
A Year of Celebrations free printable collection

A free gift

Never miss a day worth celebrating

Get the whole year of holidays and birthdays in five printable pages, plus a coloring page, free in your inbox.